The water in my Vacuity Tank keeps running and overflowing into the overflow tube.
Before You Begin:
Before you begin you may wish to have the following tools handy:
- Towels
- Cup or glass
- You may also need Fluidmaster seal #242 available from most hardware stores.
Directions:
There are three possible fixes for this scenario: resetting the water level, checking the valve seal, and cleaning debris under the valve seal. Let us begin with resetting the water level.
- Locate the water level adjustment clip. (See figure 1.0)
- To change the water level squeeze the top and bottom of the clip together and slide the clip down the rod to lower the water level. Sliding the clip up raises the water level. Do this in 1/8" increments until the proper water level is reached.
- Flush and repeat as necessary until the water level is at or slightly above the water line mark on the overflow tube. (See figure 1.1)
Click the images below for bigger versions:
Quick Fix Code: FW20003
