- About Briggs
- Customer Support
- Trade / Professional
My Vacuity is spraying water up onto the toilet seat.
Before You Begin:
The most common issue that causes this problem to occur is that debris is blocking the holes in the rim of the bowl. Before you proceed you may wish to have a mirror, soft copper wire, and a 6d or 8d nail.
- Using a mirror examine the holes under the rim of the bowl for any debris. See figure 1.0
- To be certain rim holes are clear debris, clean the holes using a 6d or 8d nail or piece of soft copper wire.
- Flush to test. Using a mirror observe the flow of water from the rim holes to be sure that it is running along the sides of the bowl. **This step may require multiple flushes in order to check all the holes.**
Click the images below for bigger versions:
Quick Fix Code: FW20006